SXT G-5HnD

Our integrated outdoor unit for Point-to-point, or as a CPE device for point-to-multipoint.

SXT G is a low cost, high speed 5GHz outdoor wireless device, with a Gigabit port, to fully utilize the capacity of 802.11n.
SXT G can be used for point to point links or as a CPE for point to multipoint installations.

Complete with a ready to mount enclosure and built-in 16dBi antenna, the package contains everything you need to make a point to point link, or connect to an AP.

Brochure: 
Product specifications: 
Details
TX power26dBm
Antenna gain16dBi
MiniPCI0
CPUAR7242
Max Power consuption7W
ArchitectureMIPS-BE
RAM32MB
LAN ports1
GigabitYes
Wireless standards802.11 a/n
Integrated WirelessYes
RouterOS LicenseL3
USB1
Memory Cards0
Dimensions140x140x56mm, 265g
PoE8-30V DC on Ether1
Operating SystemRouterOS
Temperature range-30C to +70C
Product codeRBSXTG-5HnD
CPU speed400MHz
Ethernet Output: 
SXT G (1Port Ethernet test) 64 byte frames 512 byte frames 1518 byte frames
IP Firewall Conntrack Mode Mbps Fps Mbps Fps Mbps Fps
off off Bridging 49.66 97000 370.28 90400 949.66 78200
on off Routing 34 66400 266.24 65000 631.49 52000
on off Bridging 30.77 60100 234.7 57300 650.92 53600
on on Routing 25.6 50000 200.7 49000 479.69 39500
on on Bridging 18.02 35200 141.72 34600 386.18 31800
    Notes:
  1. All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
    Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
  2. Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.