The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011L-IN is the most basic model, with five Gigabit ethernet ports, five Fast ethernet ports, power jack and PoE support. It comes in a metal indoor case.

It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license. Wall mount kit for network closet is available for purchase as an optional accessory.

Product specifications: 
CPU speed600Mhz
PCB temperature monitorNo
CPU temperature monitorNo
Product codeRB2011L-IN
Integrated WirelessNo
PoE8-28V DC on Ether1
Temperature range-30C...+70C
LAN ports10
RouterOS LicenseL4
Current MonitorNo
Max Power consuption6W
Voltage MonitorNo
Ethernet Output: 
RB2011 (all versions) (2-7 Port Test) 64 byte frames 512 byte frames 1518 byte frames
IP Firewall Conntrack Mode Mbps Fps Mbps Fps Mbps Fps
off off Bridging 77.31 151000 595.15 145300 1244.76 102500
on off Routing 65.95 128800 518.14 126500 1167.04 96100
on off Bridging 47.82 93400 368.64 90000 992.16 81700
on on Routing 41.22 80500 333 81300 952.09 78400
on on Bridging 34.1 66600 264.6 64600 765.07 63000
  1. All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
    Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
  2. Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.