The RB711GA-5HnD is a small AP type RouterBOARD 5GHz wireless router with an integrated wireless card. It has two antenna connectors for using in dual chain setups, and a Gigabit Ethernet port - the perfect device for Nv2!

The integrated 5GHz 802.11a/n wireless card is capable of up to 25dBm! It has built in 16kV ESD protection on both the RF and Ethernet ports.

Supported frequency:

Product specifications: 
Ethernet Output: 
RB711GA-5HnD @400Mhz 64 byte frames 512 byte frames 1518 byte frames
IP Firewall Conntrack Mode Mbps Fps Mbps Fps Mbps Fps
off off Bridging 49.66 97000 370.28 90400 949.66 78200
on off Routing 44.7 87300 342.02 83500 939.95 77400
on off Bridging 30.77 60106 234.7 57300 650.92 53600
on on Routing 32.77 64000 254.77 62200 704.35 58000
on on Bridging 18.02 35200 141.72 34600 386.18 31800
  1. All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
    Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
  2. Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.